Configuring Linksys WRE54G Wireless repeater

1.  Download the Setup Wizard    
      http://homesupport.cisco.com/en-us/wireless/lbc/WRE54G

2.  Power on the Wireless repeater.     
     Blue/Red the LINK LED lights up when the Range Expander is powered on. This LED will light up blue    when the Range Expander has connected to an access point or wireless router. It will light up red when the Range Expander is not connect to any access point or wireless router.

Blue. The ACTIVITY LED lights up when the Range Expander is powered on. It will flash when there is wireless network activity.

3.  Run the Application

4. The Setup Wizard will run a search for your wireless network. If found, you will be asked to confirm the settings.


5. Enter the WEP or WPA settings and Copy the Key that Generate  (Hexadecimal) you will use when connect to the network


6. Now that the Setup Wizard has found an access point or wireless router with which to communicate, it will now search for the Range Expander.


7. You will be asked to enter its password. Enter the default password, admin.


8. Go to Control Panel - Networking and Sharing Center - Connect to a Network (or go to the image of the networkind and click right)

9.  Click Rigth in the Network you want connect- Properties

10. Copy the Key you got in Step 5 (if you dont do that you will have problems with conflict with IP )